Clarypleat N66

Clarypleat N66 has the pleated membrane of Nylon 66 polymer as the filtration media. The membrane is supported by layers of polypropylene. Nylon 66 is one of the finest engineering polymers with good mechanical strength, thermal resistance, and is compatible with a wide range of fluids. Clarypleat N66 is used in sterile applications for very fine filtration.

Features and Benefits

The filter media is a pleated membrane made up of Nylon N66, an engineering polymer.
Good mechanical strength and wider chemical compatibility.
Available in very fine porosities for fine filtration in sterile environment.
Designed to offer higher flow and greater retention.

Applications

Culture Media
Alcohol
Large Volume Parenterals
High Purity Water
Buffers
Solvent
Bulk Pharmaceutical Products
Bubble Jet Ink

Specifications

Materials
Pre & Final Filter Media
Nylon 6,6
Support, Endcaps, Cage, Core
Polypropylene
“O”-ring / Gasket
Silicon , FKM , Buna-N , EPDM
Retention rating
0.05, 0.1, 0.22, 0.45, 1.0 μm
Membrane Area
≥ 0.62 m2 per 10” cartridge length
Maximum operating conditions
Recommended change-out differential pressure
0.24 MPa (2.4 bar; 34.8 psid) @ 21°C (69.8°F)
Maximum operating temperature
80°C ( 176°F )
Dimensions (nominal)
Length
10”, 20”, 30”, 40”
Diameter
69±1.5 mm (2.71” ±0.04”)
Safety data
Bacterial Endotoxin
≤0.25EU/mL
Extractable
≤40mg/10inches
Sterilization data
Autoclave
15 cycles of 30 min@124°C
Steam In-place
15 cycles of 30 min@124°C, ∆P ≤ 0.3 bar
Hot Water
85°C, 60min.20cycles

Clarycarb Activated Carbon Blocks

These filter cartridges are produced solely from activated carbon and are also referred to as activated carbon blocks. Meticulously sourced superior quality coconut shell is uti...

Know More