Clarypleat PES

Clarypleat PES has pleated polyethersulfone membranes as filter media. It is a multi-layered filter, so the final filtration media is sandwiched between the supporting layers and pre-filtration media. The rationale behind this design is to ensure precise filtration with good dirt holding ability. Owing to the hydrophilic nature of PES and the intricate construction of the filters, this filter is utilized for fine filtration of aqueous solutions.

Features and Benefits

Polyethersulfone media is ideal for filtering aqueous solutions especially in sterile applications.
All the components are thermally welded and no additives are utilized in production.
Multilayered design and precise construction results into highly efficient filtration and long service life
Available in porosities ranging from 0.05 to 1 micron.

Applications

Peptone supplemented culture media
Ultrapure water
Serum containing cell culture media
High purity chemicals
Ophthalmic solutions
Wine
Beer

Specifications

Materials
Filter Media/Support
Polyethersulfone
Support, Endcaps, Cage, Core
Polypropylene
“O”-ring / Gasket
Silicon , FKM , Buna-N , EPDM
Retention rating
0.05, 0.1, 0.22, 0.45, 1.0 μm
Membrane Area
≥ 0.6 m2 per 10” cartridge length
Maximum operating conditions
Recommended change-out differential pressure
0.24 MPa (2.4 bar; 34.8 psid) @ 21°C (69.8°F)
Maximum operating temperature
80°C ( 176°F )
Dimensions (nominal)
Length
10”, 20”, 30”, 40”
Diameter
69±1.5 mm (2.71” ±0.04”)
Safety data
Bacterial Endotoxin
≤0.25EU/mL
Extractable
≤40mg/10inches
Sterilization data
Autoclave
30 cycles of 30 min@124°C
Steam In-place
30 cycles of 30 min@124°C, ∆P ≤ 0.3 bar

Clarycarb Activated Carbon Blocks

These filter cartridges are produced solely from activated carbon and are also referred to as activated carbon blocks. Meticulously sourced superior quality coconut shell is uti...

Know More