Clarypleat PTFE

Clarypleat PTFE is a pleated cartridge filters with PTFE membrane as filter media. Due to the hydrophobic nature of Pleat Polytetrafluoroethylene , this filter is widely used in various oil and gas applications especially where process fluids are to be saved from humidity or steam. PTFE is resistant to a wide range of chemicals, hence Clarypleat PTFE is often used to deal with aggressive liquids.

Features and Benefits

Very high temperature resistance and compatible with a wide range of chemicals.
The components are sealed together with advance thermal welding techniques.
All the components utilized in this filter are FDA compliant.
They can be steam-sterilized and autoclaved.
These filters are manufactured, tested, and packaged in a clean room to ensure the purity.
Available in micron rating as small as 0.05 micron.

Applications

Gas sterilizing filtration in medicine and food industry
Sterilizing filtration of aggressive solvent and organic solvent
Clarification filtration in electroplating, fuel and chemical industry
Sterile air filtration

Specifications

Materials
Filter Media
Hydrophobic PTFE (Polytetrafluoroethylene)
Support, Endcaps, Cage, Core
Polypropylene
“O”-ring / Gasket
Silicon , FKM , Buna-N , EPDM
Retention rating
0.05, 0.1, 0.22, 0.45, 1.0 μm
Membrane Area
≥ 0.74 m2 per 10” cartridge length
Maximum operating conditions
Recommended change-out differential pressure
0.24 MPa (2.4 bar; 34.8 psid) @ 21°C (69.8°F)
Maximum operating temperature
80°C ( 176°F )
Dimensions (nominal)
Length
10”, 20”, 30”, 40”
Diameter
69±1.5 mm (2.71” ±0.04”)
Safety data
Bacterial Endotoxin
≤0.25EU/mL
Extractable
≤15mg/10inches
Sterilization data
Autoclave
100 cycles of 60 min@126°C 40 cycles of 60 min@140°C
Steam In-place
100 cycles of 60 min@126°C, ∆P ≤ 0.3 bar
40 cycles of 60 min@140°C, ∆P ≤ 0.3 bar